Application
Check moisture level
of timber prior to application. Shake Floor Seal
for a few minutes before use. Use a synthetic or lambs wool applicator, pad or roller. Do not thin.
Avoid over-rigorous application. Ensure good ventilation.
Do not use below 10°C. Always check adhesion
prior to application by applying to a small test
area.
Note: For floors where
there is a risk of side-bonding, e.g. end grain
floors, softwood plank floors and hardwood floors
with under-floor heating, it is recommended that
Ronseal Contractor Quick Prime is used for the
initial application.
|
